DIY Photo Frame Floating Canvas
Senin, 12 Agustus 2019
Edit
This tutorial is super descriptive, a little lengthy, but also really easy! Don’t be intimidated by the length of this tutorial- I just wanted to make sure each step was super clear, easy, and well described! Stick to the instructions and you’ll end up with a high-end, well built and completely custom frame. If I can do it, you can too!
What you’ll need for this project:
Step To Make This Frame
Step 1 // Measure your canvas & draw your plans. Prior to purchasing your lumber, measure your canvas (also consider the depth). In the image below, you’ll notice the three pieces on the left are wider than the three pieces on the right. The thicker boards were used for the back of the frame, and the narrow boards became the side rails. This combination gave me the thickness I needed for my canvas- it’s totally ok to mix and match.
Read More Step..
What you’ll need for this project:
- Lumber
- Wood Glue
- Tape Measure
- Wood Clamps (OR self squaring jig clamp)
- Sand Paper (80 – 100 grit)
- V-nail punch & v-nails (12 per frame), optional
- Stain, paint or clear coat of your choice
- Finishing Nails
- Kraft Paper
- Scissors
- Mounting Hardware
- Saw
Step To Make This Frame
Step 1 // Measure your canvas & draw your plans. Prior to purchasing your lumber, measure your canvas (also consider the depth). In the image below, you’ll notice the three pieces on the left are wider than the three pieces on the right. The thicker boards were used for the back of the frame, and the narrow boards became the side rails. This combination gave me the thickness I needed for my canvas- it’s totally ok to mix and match.
Read More Step..
